5.8GHz 2.5dBi Antenna with RP-SMA connector Full Working Compliment of 7...
V-Mount 14.8V, 130Wh Li-ion Rechargeable Battery (approx 4.5 hours @ 30W)
V-Gear VG-DTAP D-Tap (P-TAP) Power Connector
5.8GHz 5.5dBi Antenna with RP-SMA connector Full Working Compliment of 7...
AirAV / Hollyland Cosmo600 SDI/HDMI Wireless Link System
AirAV / Hollyland Protection Bag to Suit MARS300 Wireless HDMI System
AirAV / Hollyland Mars T-1000 Full-duplex Wireless Intercom System
AirAV/Hollyland AAVMARS400S SDI/HDMI Wireless Video Transmission System
Datavideo BC-100 HD Broadcast Block Camera with HDR & 3D Noise Reduction
Datavideo NVS-33 Professional Streaming Encoder and Recorder
AAV1200AU
New product
AirAV 1200AU 3G/HD/SD-SDI and HDMI Link System Fly-Pak
This product is no longer in stock
Availability date:
The 1200AU Transmitter features a sturdy, CAD-designed case to enhance the look and operation of the system.
It also features auto-selection of either SDI and HDMI inputs. In situations where both signal types are connected to the transmitter, the SDI input will take priority. Designed to be used in conjunction with the AirAV 1200AU Zero-Delay HD Receiver to create an easy-to-setup High Quality HD camera link System. The AirAV 1200AU Link system is capable of 1500+ metres depending on optional antenna configurations.
Selection of operating frequency is extremely simple and straightforward. A visual confirmation that valid video is being received from the camera or other source is also provided.
The transmitter can operate from a wide ranging voltage supply of anywhere between 6 and 36 volts. Power can be supplied via a '970-style battery or via an external supply to the 2-pin Lemo power connector. A D-Tap to Lemo power cable is supplied with the unit.
The 1200AU Receiver features a sturdy, CAD-designed case to enhance the look and operation of the system while the system is in use, as well as affording you serious protection of your Link investment when not in use.
It also features simultaneous SDI and HDMI outputs. Designed to be used in conjunction with the AirAV 1200AU HD Transmitter to create an easy-to-setup High Quality HD camera link System. The AirAV 1200AU system is capable of 1500+ metres depending on optional antenna configurations.
Selection of operating frequency is extremely simple. Easy-to-read visual confirmation is also provided that indicates that the link system is "up", that there is a valid video signal being received from the transmitter, as well as an on-receiver RSSI (received signal strength indicator) are also provided.
The AirAV 1200AU Receiver can operate from a wide ranging voltage supply of anywhere between 6 and 36 volts. Power can be supplied standard V-Lock battery or via an external supply to the 2-pin Lemo power connector. A D-Tap to Lemo power cable is supplied with the unit.
Transmitter | Receiver | |
Interface: | SDI Input: BNC Female with Loop-thru | SDI Output: BNC Female x 2 (Concurrent Output) |
Supply Voltage Range: | 6.5-36.0V DC | 6.5-36.0V DC |
Power consumption: | < 6 W | < 8 W |
Size: | 120x 70 x 25mm not including Antennae | 160x 110 x 25mm not including Antennae |
Weight: | 380g | 540g |
Input Video Format: | HDMI:SD, HD,525i, 625i, | N/A |
Output Video Format: | N/A | HDMI:SD, HD,525i, 625i, |
Input Audio Format: | SDI embedded 4 ch 24 bit, 48KHz Sample Rate | N/A |
Output Audio | N/A | SDI embedded 4 ch 24 bit, 48KHz Sample Rate |
Signal Indicator | POWER: Green | POWER: Green |
Frequency Band | 5.1-5.9GHz configured for Australia/NZ | 5.1-5.9GHz configured for Australia/NZ |
Modulation Mode | OFDM 16QAM | OFDM 16QAM |
Transmission Power | 20dBm max allowable under ACMA regulations | N/A |
Receiver Sensitivity | N/A | -75dBm |
Occupied Bandwidth | 20/40MHz | 20/40MHz |
Temperature Range | 0 ~ 40°C (Operating) | 0 ~ 40°C (Operating) |
Compliance | FCC; CE; RCM | FCC; CE, RCM |
$ 79.95
$ 795.00
$ 5,995.00
$ 8,995.00
$ 109.95
$ 109.95